The Ironclad is a sensor cable that is attached to the fence to detect any cutting, climbing, lifting or jumping off the fence. A single run of the cable in the middle of the fence will detection the whole height of the fence up to 10ft against any intrusion attempt. Each processor can monitor up to 2 zones with 2 separate relay output per zone, the zones are sold pre-cut in 250'/500'/1000' (75m/152m/305m). The system designed to connect to any alarm system and is able to retrofit to old or new burglar alarms/DVR/NVR/SCADA systems. Fully wrapped by stainless steel braid the Ironclad is Iideal for installation on wire fences, razor wires and concertina coil.
The system utilizes 3 layers of false alarm filtration. 1. The Algorithm of detection is designed to detect only sharp frequencies vibrations associated with intrusion attempts while filtering the long frequencies from weather 2. 22 levels of sensitivity easily adjusted with dip switches 3. Weather station to avoid false alarms caused by weather condition.
